Window Cleaning in Queens, NY
Queens packs more architectural and cultural variety into one borough than almost anywhere in the country, and window cleaning here has to keep up. A pre-war co-op in Forest Hills, a glass-clad tower in Long Island City, a busy restaurant storefront in Jackson Heights, and a freshly built development in Jamaica each call for a different approach. Total Window Service works across all of them, matching method, equipment and scheduling to the property in front of us rather than running every job through the same template. The result is residential and commercial glass that holds up to how Queens actually lives and works.
Built for the Way Queens Is Built
Drive from Astoria to Flushing and the building stock changes block by block: brick row houses, mid-century apartment blocks, modern condo towers, and storefronts that double as the front room of a family business. Our technicians read each surface before they touch it – hand-detailing divided-light sashes on older homes, working pure-water poles on mid-rise frames, and rigging rope access for the tall LIC and Flushing buildings that no ladder will reach. Because we are a local team that has worked these neighborhoods for years, we plan around the realities of Queens streets, parking, and building access instead of being surprised by them.
What Our Customers Say
Construction-Dust Removal for a Borough Under Development
Few parts of New York are building as fast as Queens, and that growth leaves a mark on the glass. Concrete particulates, drywall residue, and silicone caulk overspray bond to a window very differently from ordinary city grime, and scrubbing them the usual way can drag grit across the pane and leave scratches behind. We treat construction contamination as its own job: targeted solvents for most film, and where the bond is heavier, the Glass Renu micro-grinding system to lift it off without harming the surface. New residential and commercial buildings across Long Island City, Astoria, and Jamaica see this work most often, and we assess the level of contamination during the free on-site visit so the quote reflects what the glass actually needs.
Storefronts, Foot Traffic, and Flexible Hours
A spotless storefront is part of how a Queens business presents itself, but the cleaning cannot get in the way of the day. For retail and restaurants in high-traffic stretches of Flushing, Jackson Heights, and beyond, we schedule around your operating hours – early mornings, evenings, or weekends – so customers are not stepping around equipment. Ground-level glazing is usually finished without any disruption at all. When upper floors call for lift equipment, we line up the DOT permits and street-access windows in advance to keep the impact on neighboring shops to a minimum.
Decorative and Privacy Film for Restaurants, Offices, and Retail
Beyond cleaning, we install decorative and privacy window film that lets Queens businesses change how their glass works without replacing it. Frosted and etched-glass patterns, branded graphics, and custom designs from the 3M Fasara and ByDesign product lines can turn a clear partition into privacy for a back office, a logo across a storefront, or a finished look for a dining room. We bring physical samples to the free estimate so you can see the effect on your own glass before deciding on anything.
Co-op and Condo Boards, Handled Properly
Plenty of Queens buildings require board approval, insurance documentation, and permit paperwork before any exterior work can begin, and a missing form can stall a job for weeks. We are used to working through that process. On request we provide a full documentation package – Certificate of Insurance (COI), W-9, and any compliance paperwork the board asks for – and we coordinate directly with building management so approvals move along before anything is scheduled.
Working Safely Around Queens Weather
High-rise glass near Jamaica Bay and along the Long Island Expressway corridor sits exposed to wind that can pick up fast, especially in the colder months. We do not perform rope access or suspended scaffold work above 30 mph wind speed – no exceptions. If conditions force a change on the day of the job, we tell you ahead of time and rebook at the earliest open slot, and any deposit stays fully applied to the rescheduled date. It is a simple rule that keeps both our crew and your property out of avoidable risk.
How an Estimate Works
Getting a price for Queens window cleaning is straightforward. Send a few photos of your windows through our online form and answer a short set of questions about access and the work you need. One of our technicians follows up to confirm details and, where it helps, schedules a final on-site estimate so the price you receive reflects the real conditions of the building. You see an accurate quote before any work begins.
Why Queens Property Owners Call Total Window Service
We have been in business since June 2012 – over 13 years serving Queens, Brooklyn, Manhattan, and Long Island – with more than 3,100 projects completed across homes, commercial spaces, and historic buildings. Our team of 14 includes IRATA- and SPRAT-trained rope access technicians, so the tall and hard-to-reach jobs are handled by people trained for them rather than improvised. We are fully insured and experienced, we use professional equipment suited to each surface, and we treat a Flushing storefront with the same care as a Forest Hills co-op. That combination of local knowledge and proper method is what keeps Queens clients coming back.
Contact Us
Ready to schedule your Queens window cleaning? Reach Total Window Service through our online form or give us a call. For a fast online estimate, send photos of your windows to our email along with your building’s exact address, so we can look it up and see what type of windows you have – it helps us provide a more accurate quote. Whether it is a single storefront or a full high-rise, we are ready to bring clear, bright glass to your corner of Queens.
Check our price page for residential cleaning options and what goes into quote. We also install window film and restore glass for homes and commercial buildings and we are fully insured and experienced.
Do you clean windows on Queens co-op buildings where board approval is required before exterior work begins?
Yes. We are experienced working with Queens co-op and condo boards that require advance approval, insurance documentation, and permit paperwork before any exterior work is authorized. We provide a full documentation package on request – Certificate of Insurance (COI), W-9, and any compliance certificates required by the board. We coordinate directly with building management so the approval process moves efficiently before scheduling.
Can your team work on Flushing and Jackson Heights commercial storefronts with heavy foot traffic without disrupting business hours?
Yes. For Queens retail and commercial properties in high-traffic areas, we schedule work around your operating hours – early morning, evening, or weekend slots are available depending on access requirements. For storefront glazing at ground level, most jobs can be completed without disrupting customers. For upper floors requiring lift equipment, we coordinate DOT permits and street-access windows to minimize impact on surrounding businesses.
Do you install decorative or privacy window film for Queens restaurants, offices, and retail spaces?
Yes. We carry a full range of decorative and privacy films – including frosted and etched-glass patterns, and custom graphic films under the 3M Fasara and ByDesign product lines. These are popular for Queens restaurants and offices that need privacy partitions, branding on glass, or decorative storefront treatments without replacing existing glazing. We bring physical samples to the free estimate visit so you can evaluate the appearance before committing.
What wind conditions do you work in for Queens high-rise rope access jobs?
We do not conduct rope access or suspended scaffold work above 30 mph wind speed – no exceptions. Queens waterfront areas and high-rise buildings near Jamaica Bay or along the Long Island Expressway corridor can experience strong wind gusts, particularly in winter months. If weather conditions require a reschedule on the day of the job, we notify you in advance and rebook at the earliest available slot. Your deposit remains fully applied to the rescheduled date.
Can you clean windows affected by construction dust from the many active development projects across Queens?
Yes. Construction dust – including concrete particulates, drywall residue, and silicone caulk overspray – bonds to glass differently than regular urban grime and requires a specialized approach. We use targeted solvents and, where necessary, the Glass Renu micro-grinding system to remove construction contamination without scratching the surface. This service is frequently needed for new residential and commercial developments across Long Island City, Astoria, and Jamaica. We assess the level of contamination during the free on-site visit and quote accordingly.
How long has Total Window Service been operating in Queens and the broader NYC area?
We have been in business since June 2012 – over 13 years serving Queens, Brooklyn, Manhattan, and Long Island. In that time we have completed more than 3,100 projects across residential, commercial, and historic building types. Our team of 14 includes IRATA- and SPRAT-trained rope access technicians. Founder Andriy Mykyta is IRATA- and SPRAT-trained in rope access and holds a current NYC DOB Site Safety Training (SST) Supervisor card – so Queens high-rise and multi-story work is handled by trained specialists.
How Do You Request an Estimate Online?
For a fast, accurate online estimate, send us a few photos of your windows along with the building’s exact address so we can look up the property and see what type of glass you have. The more we can see up front, the tighter the quote. Thanks.